Optimizing Power and Sleep Settings on HKMLC Smart Board

This allows users to save energy which also increases their user experience and increases the lifetime of the device. Sleep settings, what they are based on, energy saving modes, disabling the automatic keyboard ''shut down'' when it has not been used for a certain period of time and many other useful things will help keep the power used to a ''low'' value and they will help to optimise performance. (Here’s how to prepare yourself for this most successfully.)

Accessing Power Settings

To modify anything, you need to open the Power Settings Menu first:

Your HKMLC Smart board should be on and at the Main screen.

Go to System Settings → Power Settings.

You’ll find options for sleep mode, auto-shutdown, or power-saving settings here.

Read on to learn about additional energy-efficient smart HKMLC boards.

Adjusting Sleep Mode

Setting an automatic sleep mode conserves energy when the smart board is unused:

Select the Sleep Mode option in the Power Settings.

Time before bpm goes to sleep, select an interval (10 min, 30 min, or 1 hr)

Finally, confirm your choice and click on Save.

Setting up Automatic Shutdown

To avoid unneeded power loss, use auto shutdown:

Choose Automatic Shutdown under Power Settings.

NOTE: If board is inactive, set a time for board to turn off.

This is especially helpful in classrooms and offices with devices that are left on after hours.

Visit HKMLC smart boards with intelligent power management

How to Turn Energy-Saving Mode On or Off

Instead, energy-saving mode allows you to use the device by reducing the brightness of the screen and system performance to save power:

Visit Power Settings > Energy-saving mode.

Enable this to save energy.

If you need better performance, DISABLE it.

Increased Energy Efficiency: Dimming Display

Dim display brightness uses less battery:

Open Display Settings.

Manually adjust brightness or use Auto Brightness Adjustment }

Auto mode adjusts the screen brightness depending on the ambient lighting.

Configure Schedule for Power ON/OFF

To get the HKMLC smart board to turn on and off at certain times:

Power Settings > Schedule Power On/Off

Configure the On and Off Times as necessary.

These are perfect for planned lessons or meetings.

Switch to an HKMLC board, which is smart and can be scheduled.

Optimizing Standby Mode

To reduce energy usage without sacrificing readiness of the board:

Set Power Settings to allow Low Power Standby.

This rapid wake-up time is combined with very low current consumption.

How to Restore Power Settings to Default Settings

If power settings are incorrect, restore them to factory defaults:

In System Settings, click Restore Defaults.

Select & confirm this, and reboot if required.

Saving and Exiting

Once all the settings are configured:

Click Save Changes.

Exit the Power Settings menu.

Your smart board will operate under these settings that you have optimized.

Restarting the Smart Board (If Necessary)

Some of the changes will need a restart:

Press and hold the Power button, then click Restart.

After reborading you should check that your settings have been properly applied.

HKMLC smart board power settings can be customized and adjusted to optimize the use of your smart board so that it uses less electricity, at less costs, whilst ensuring that it lasts longer. See our latest HKMLC smart boards if you need an advanced model and with better energy-saving feature.